Produced via INSITE™ Technology. Produced using bio-based feedstocks. Certified on a mass balance basis by the International Sustainability & Carbon Certification (ISCC).

Next generation low density polyethylene resin for high speed extrusion coating.

A linear low density metallocene copolymer produced by INSITE™ Technology, processable in cast film mono- and coextrusion equipment designed for polyethylene. 

A white to light yellow crystalline solid (below melting point) of high purity and low acidity, containing approximately 97% 4,4'-diphenylmethane diisocyanate and 3% 2,4'-diphenylmethane diisocyanate.

 Multi-purpose grade designed for formulations of tile adhesives and skim coat. It has a surface treatment which allows a delayed dissolution.

A high-purity grade of monopropylene glycol for use in pharmaceutical, food, cosmetic, personal care, flavor and fragrance, plus a variety of other applications.

An acrylic copolymer latex. RHOBARR™ 214 is designed for use in paper and board coatings offering mineral oil barrier properties as well as plasticizer resistance for thermal paper applications. It has been developed to be applied by most common aqueous coating or printing methods.

A unique grafted polyether polyol containing copolymerized styrene and acrylonitrile . It is designed for use in ultra-low-emission flexible molded applications, high comfort and semi flexible foams.

Styrene acrylonitrile-based polyol with 43% solids content. Offers an increased solids level for the manufacture of extra hard flexible foams, whilst enabling the manufacture of low odor and reduced volatiles foams.

A modified hydroxypropyl methyl cellulose (HPMC). This product was developed for cement-based applications like high quality cement-based tile adhesives.

Designed for cement spray plaster applications, such as one- or two-coat cement-based plaster, cement-based lightweight plaster and exterior insulation finishing system (EIFS).